This HP Printer Error Code 59.F0 is primarily caused by a failure of transfer alienation in which the ITB is trapped and does not rotate, the problem with the SR9 sensor is another potential explanation behind the HP Error Code 59.F0 and the main problem is arise in internal motor. If you are seen this error visit my website.
Method 1: Reset the printer: Reset the printer settings. Remove the Surge Protector If the problems remain unresolved, then move on to the next method.
Method 2: Reset the ITB: Reset the ITB Now, check the internal connections of ITB such as the connection between ITB and a transfer-roller-disengagement sensor located at connector J19 and the connection between ITB and DC controller PCA also known as connector J128.
Method 3: Test the ITB: If the error still persists, then you should remove the ITB completely and then test the ITB gear and the flag manually. How to do this? Rotate the gear and check for any fluctuation in the flag when you turn the white gear. If the flag is found to be damaged, then it is high time to replace the ITB. But what if the flag and ITB gear is working perfectly? Check for the Sensor SR9. For this, you will have to follow the following steps to do the Manual Sensor test. Remove the ITB gear, locate the Sensor SR9 located inside the ITB cavity and browse the control panel. Press the ‘Home’ button and press the down arrow to highlight the diagnostics menu. Click on the okay button and select the Manual Sensor Test and click OK. Check inside the ITB cavity and release the SR9 flag and check the display for the sensor response when you press the flag. The sensor should toggle between 0 and 1. If the toggle does not happen, then you need to get the sensor replaced.
